I have another new unit that will not register on the network. Its still exhibiting the same “Flicker slowly (200 ms High/1800 ms Low)” showing not on the network. This is my 3rd unit so I know it takes time. This is day 4. I’ve deactivated the unit in the connect portal and reactivated (a few times). I’ve nuked the memory as listed here on the forum (3 times). I have another unit on my desk that works great so I know the cellular service is good. Here are the results of several queries.
AT+CREG=? result: {‘response’: [‘+CREG: (0-2)’, ‘OK’], ‘status’: 0}
AT+QLTS=2 result: {‘response’: [‘OK’], ‘status’: 0}
AT+COPS=0 result: {‘response’: [‘OK’], ‘status’: 0}
So it shows that it has no connection, will not get network time, and will not upload with a known good credentials and program.
What’s next?