Is it possible to use the QMI connection via USB and serial ports simultaneously? Wanting to send gps information to a secondary app while the USB port sends info to a navagation app.
The secondary app would be used for separate geo-location tracking. Thanks.
Is this a difficult question?
Direct quote from the Sixfab contact page…
“If you have a question or advice about our products, you can ask at our forum. We will answer in a short time.”
2 weeks ago at this writing… no response.
Sorry for the late reply.
Yes, this is possible. It works with QMI
/dev/cdc-wdm0 port. It can use serial or ttyUSB ports for it.