Two sixfab Base Hat and 2 interfaces


I have 2 different Base hat with 2 different sims corresponding to 2 different network operator. I would like thta the shield 2 (e.g on the top) has always the interface wwan1 and the above shield has always the interface wwan0. Is it that possible? By this way, the assigning for the operator is much better by the option quectel-CM -s apn1 -i wwan0 quectel-CM -s apn2 -i wwan1.


1 Like

You may use udev rule of linux to specify this.
This article could be helpful.