Support and discussions for Sixfab Raspberry Pi Base HATs. Connect your Raspberry Pi to cellular networks with plug-and-play LTE, 3G, and GPS hardware designed.
Welcome to the Raspberry Pi Base HATs category. This is your dedicated community space for Sixfab’s family of cellular connectivity HATs built for Raspberry Pi. Designed to fit directly onto your Raspberry Pi board, these HATs make it straightforward to add 3G, 4G/LTE, and GPS capabilities to your projects whether you are building a remote sensor node, a connected gateway, or a mobile IoT device.
Whether you are getting a cellular modem online for the first time, dialing in your APN settings, configuring GPS on the 3G/4G & LTE Base HAT V2, or deploying a fleet of Pi-based devices in the field, this is the place to collaborate. Every HAT in this family is designed to work with standard USB-connected cellular modules and Raspberry Pi OS, keeping the software setup accessible without sacrificing capability. Sixfab Base HATs give your Raspberry Pi reliable WAN connectivity without requiring custom hardware or complex integration work.
Topics covered in this category:
Getting started with Sixfab Base HATs on Raspberry Pi OS Cellular modem setup, APN configuration, and SIM provisioning GPS and GNSS integration using the onboard u-blox module Power management and USB modem compatibility Sending data over LTE for remote monitoring and IoT applications Connecting Base HATs with cloud platforms and edge software stacks Troubleshooting connectivity, signal, and driver issues
Explore the Products:
→ Raspberry Pi Base HAT lineup: https://sixfab.com/product/raspberry-pi-base-hat-3g-4g-lte-minipcie-cards/
Helpful Resources:
- Documentation: docs.sixfab.com
- Community: community.sixfab.com
- Sixfab Store: sixfab.com/shop