Trying to register device on ATT Firstnet but it will not register. I see that it can be done but need some help on doing that please. Thanks!
@ensar There wasn’t a reply button on your response but here you go
Yes, I have ATT Firstnet cell phone with excellent coverage. This should be working with ATT right? See below
AT+CFUN?
+CFUN: 1
OK
AT+QCFG=“usbnet”
ERROR
AT+QNWPREFCFG=“mode_pref”
ERROR
AT+QNWPREFCFG=“nr5g_disable_mode”
ERROR
AT+QNWPREFCFG=“nr5g_band”
ERROR
AT+QNWPREFCFG=“nsa_nr5g_band”
ERROR
AT+QENG=“servingcell”
ERROR
AT+QCFG=“band”
ERROR
AT+QNWINFO
+QNWINFO: No Service
OK
AT+QNWINFO
+QNWINFO: No Service
OK
AT+COPS?
+COPS: 0
OK
AT+CGACT?
+CGACT: 1,0
+CGACT: 2,0
+CGACT: 3,0
OK
AT+CGPADDR=1
+CGPADDR: 1,“”
OK
AT+QGMR
RM502QAEAAR11A04M4G_01.202.01.202
OK
AT+CGDCONT?
+CGDCONT: 1,“IPV4V6”,“firstnet-broadband”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0,“”,0
+CGDCONT: 2,“IPV4V6”,“ims”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0,“”,0
+CGDCONT: 3,“IPV4V6”,“SOS”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,1,“”,0
OK
Hi,
Do you confirm their coverage in the location of your device?
Could you please share the output of the following commands?
AT+CFUN?
AT+QCFG=“usbnet”
AT+QNWPREFCFG=“mode_pref”
AT+QNWPREFCFG=“nr5g_disable_mode”
AT+QNWPREFCFG=“nr5g_band”
AT+QNWPREFCFG=“nsa_nr5g_band”
AT+QENG=“servingcell”
AT+QCFG=“band”
AT+QNWINFO
AT+QSCAN=3
AT+COPS?
AT+CGACT?
AT+CGPADDR=1
AT+QGMR
AT+CGDCONT?