Raspberry Pi 4G/LTE Cellular Modem Kit + Telit LE910C4-NF & Google FI

I am now trying to get my system working with Google Fi as they offer an additional data sim with my current account at no extra charge.

Here is my output:

ATI
332

OK
AT+CGMR
M0F.660010

OK
AT+GMM
LE910C4-NF

OK
AT+CGSN
350344982629964

OK
AT#SWPKGV
25.21.640-P0F.661803
M0F.660010
P0F.661803
A0F.660010

OK
AT#FWSWITCH?
#FWSWITCH: 1,0,0

OK
AT+CPIN?
+CPIN: READY

OK
AT+CFUN?
+CFUN: 1

OK
AT+COPS?
+COPS: 0,0,“Google Fi”,2

OK
AT#USBCFG?
#USBCFG: 4

OK
AT#BND?
#BND: ,10,80800000000381A

OK
AT+CREG?
+CREG: 0,1

OK
AT+CGREG?
+CGREG: 0,1

OK
AT+CGDCONT?
+CGDCONT: 1,“IPV4V6”,“h2g2”,"",0,0,0,0
+CGDCONT: 2,“IPV4V6”,“vzwadmin”,"",0,0,0,0
+CGDCONT: 3,“IPV4V6”,“vzwinternet”,"",0,0,0,0
+CGDCONT: 4,“IPV4V6”,“vzwapp”,"",0,0,0,0
+CGDCONT: 5,“IPV4V6”,"","",0,0,0,1
+CGDCONT: 6,“IPV4V6”,“vzwclass6”,"",0,0,0,0

OK
AT+CSQ
+CSQ: 18,1

OK
AT+CGATT?
+CGATT: 1

OK

OK
AT+COPS=2
OK
AT+CGDCONT=1,“IPV4V6”,“h2g2”
OK
AT+COPS=0
OK

AT+COPS=2
OK
AT+CGDCONT=1,“IPV4V6”,“h2g2”
OK
AT+COPS=0
OK

AT+COPS?
+COPS: 0,0,“Google Fi”,2

OK
AT+CREG?
+CREG: 0,1

OK
AT+CGREG?
+CGREG: 0,1

OK
AT+CGDCONT?
+CGDCONT: 1,“IPV4V6”,“h2g2”,"",0,0,0,0
+CGDCONT: 2,“IPV4V6”,“vzwadmin”,"",0,0,0,0
+CGDCONT: 3,“IPV4V6”,“vzwinternet”,"",0,0,0,0
+CGDCONT: 4,“IPV4V6”,“vzwapp”,"",0,0,0,0
+CGDCONT: 5,“IPV4V6”,"","",0,0,0,1
+CGDCONT: 6,“IPV4V6”,“vzwclass6”,"",0,0,0,0

OK
AT+CSQ
+CSQ: 18,1

OK
AT+CGATT?
+CGATT: 1

OK

Seems it is seeing Google FI but not connecting? Am I missing something?

Has anyone else got this going with Google Fi?

Hi,

Everything looks fine. It is registered to the network. Is the wwan0 interface assigned an IP?

No it is not? I put the data sim in my phone and “activated” and was able to look at the internet. Put back in the pie hat and no IP.? Any ideas.

Run AT#ECM=1,0 and the response should be OK. Then check again. If you get an ERROR please try the same command again.

AT#ECM? Should return 0,1. If return is 0,0 run the AT#ECM=1,0,"","",0 command.

Well, no luck…

Google fi app on my phone shows data sim is activated.

AT#ECM=1,0
Just returnes Error

AT#USBCFG?
Returns 4

Although,
AT+CREG?
Returns
+CREG: 0,0
As well as,
AT+CGREG returns 0,0

AT+CGDCONT?
+CGDCONT: 1,“IPV4V6”, “h2g2”,"", 0,0,0,0

Sorry my replies are delayed…traveling from island to island in kayak on the coast of Maine.

So I am back at it. Went through all the settings and they are the same as I listed before except:

AT+COPS? Returns
+COPS: 0,0,“Google Fi”, 7

Does the 7 mean anything? Was 2 at one point.