QMI – Raspberry Pi 4G/LTE Cellular Modem Kit – Pi 3B+, Rogers (Ontario, Canada)

Hi Ensar,

Thanks a bunch for the reply!

This was the result of the ‘uname -sr’ command.

The right angle cable was the cable that I cut one end to change it so both sides have a micro USB (when used with my Pi Zero).

I changed it to another cable I found, tossed my sim card in, rebooted, ran the ‘sudo ./quectel-CM -s ltemobile.apn’ command to start up with Rogers Wireless APN (my provider here in Ontario, Canada and bam it started up!

Thank you again - super appreciated!

1 Like