I installed all the drives and everything on my raspberrypi
I’m getting this message from cm-logs
check_network() → (‘Network not registered: ‘, (’\n\n+CREG: 0,2\n\n\n\nOK\n\n\n’, ‘’, 0))
I’m running on Quectel EC25 EG25
any Idea?
I installed all the drives and everything on my raspberrypi
I’m getting this message from cm-logs
check_network() → (‘Network not registered: ‘, (’\n\n+CREG: 0,2\n\n\n\nOK\n\n\n’, ‘’, 0))
I’m running on Quectel EC25 EG25
any Idea?
Hi,
Could you please provide us with more information?
cat /etc/os-release
uname -a
lsusb
lsusb -t
usb-devices
AT Commmands |
---|
AT+QGMR |
AT+CPIN? |
AT+CPAS |
AT+CFUN? |
AT+COPS? |
AT+QCFG=”usbnet” |
AT+QCFG=band |
AT+CREG? |
AT+CGDCONT? |
AT+CSQ |
AT+CGATT? |
AT+QCFG=nwscanseq |
AT+QCFG=nwscanmode |
AT+QCFG=iotopmode |
AT+QCSQ |
AT+QNWINFO |
If you want to activate the remote support setting of your device and share the support key with me, I can help you quickly.
How Can I send the remote key to you safely? email? sorry I’m new here!
Please make sure your antenna is connected properly. The module signal strength is poor, and sometimes it cannot be detected.