Jumpstart 5G - No Cellular Network - Static IP

Sixfab Jumpstart 5G
1

Unable to ping usb0 after b2b.static APN input.

Help

pi@raspberrypi:~ $ atcom AT+CGDCONT=1,"IPV4V6","b2b.static"
AT+CGDCONT=1,“IPV4V6”,“b2b.static”
OK

–

pi@raspberrypi:~ $ atcom AT+CFUN=1,1
AT+CFUN=1,1
OK

pi@raspberrypi:~ $ ping -I usb0 sixfab .com -c 5
PING sixfab .com (172.67.139.208) from 192.168.225.21 usb0: 56(84) bytes of data.
From mobileap.qualcomm .com (192.168.225.1) icmp_seq=1 Destination Net Unreachable
From mobileap.qualcomm .com (192.168.225.1) icmp_seq=2 Destination Net Unreachable
From mobileap.qualcomm .com (192.168.225.1) icmp_seq=3 Destination Net Unreachable

— sixfab .com ping statistics —
5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4015ms

pi@raspberrypi:~ $ bash monitor_network.sh
monitor_network.sh: line 3: atcom: command not found
monitor_network.sh: line 4: atcom: command not found
monitor_network.sh: line 5: atcom: command not found
monitor_network.sh: line 6: atcom: command not found
monitor_network.sh: line 7: atcom: command not found
monitor_network.sh: line 8: atcom: command not found
monitor_network.sh: line 9: atcom: command not found
monitor_network.sh: line 10: atcom: command not found
monitor_network.sh: line 11: atcom: command not found
monitor_network.sh: line 12: atcom: command not found
monitor_network.sh: line 13: atcom: command not found
monitor_network.sh: line 14: atcom: command not found
monitor_network.sh: line 15: atcom: command not found
monitor_network.sh: line 16: atcom: command not found

pi@raspberrypi:~ $ atcom AT+QNWPREFCFG=?
AT+QNWPREFCFG=?
+QNWPREFCFG: “gw_band”,B1:…:BN
+QNWPREFCFG: “lte_band”,B1:…:BN
+QNWPREFCFG: “nsa_nr5g_band”,B1:…:BN
+QNWPREFCFG: “nr5g_band”,B1:…:BN
+QNWPREFCFG: “mode_pref”,RAT1:…:RATN
+QNWPREFCFG: “srv_domain”,(0-2)
+QNWPREFCFG: “voice_domain”,(0-3)
+QNWPREFCFG: “roam_pref”,(1,3,255)
+QNWPREFCFG: “ue_usage_setting”,(0,1)
+QNWPREFCFG: “policy_band”
+QNWPREFCFG: “ue_capability_band”
+QNWPREFCFG: “rat_acq_order”,RAT1:…:RATN
+QNWPREFCFG: “nr5g_disable_mode”,(0-2)

OK

pi@raspberrypi:~ $ atcom AT+QENG
AT+QENG
ERROR

pi@raspberrypi:~ $ atcom AT+QNWINFO
AT+QNWINFO
+QNWINFO: No Service

OK

pi@raspberrypi:~ $ atcom AT+C5GREG
AT+C5GREG
OK

pi@raspberrypi:~ $ atcom AT+COPS
AT+COPS
OK

2

Hello,

Could you please share the output of the following commands ?

atcom AT+QGMR
atcom AT+CGDCONT?
atcom AT+CFUN?
atcom AT+QCFG=\“usbnet\”
atcom AT+QNWPREFCFG=\“mode_pref\”
atcom AT+QENG=\“servingcell\”
atcom AT+QNWPREFCFG=\“nr5g_disable_mode\”
atcom AT+QNWPREFCFG=\“nr5g_band\”
atcom AT+QNWPREFCFG=\“nsa_nr5g_band\”
atcom AT+QNWINFO
atcom AT+COPS?
atcom AT+CGACT?
atcom AT+CGPADDR=1

3

I had better result after moving static off the device. See below.

AT+QGMR
RM502QAEAAR11A04M4G_01.202.01.202

OK

AT+CGDCONT?
+CGDCONT: 1,“IPV4V6”,“fast.T-Mobile.com”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0,“”,0
+CGDCONT: 2,“IPV4V6”,“ims”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0,“”,1
+CGDCONT: 3,“IPV4V6”,“sos”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,1,“”,1
+CGDCONT: 4,“IPV4V6”,“tmus”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0,“”,0
+CGDCONT: 5,“IPV4V6”,“h2g2”,“0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0”,0,0,0,0,“”,0

OK

AT+CFUN?
+CFUN: 1

OK

AT+QCFG=usbnet
ERROR

AT+QNWPREFCFG=mode_pref
ERROR

AT+QENG=servingcell
ERROR

AT+QNWPREFCFG=nr5g_disable_mode
ERROR

AT+QNWPREFCFG=nr5g_band
ERROR

AT+QNWPREFCFG=nsa_nr5g_band
ERROR

AT+QNWINFO
+QNWINFO: “TDD NR5G”,“310260”,“NR5G BAND 41”,530190

OK

AT+COPS?
+COPS: 0,0,“T-Mobile”,11

OK

AT+CGACT?
+CGACT: 1,1
+CGACT: 2,0
+CGACT: 3,0
+CGACT: 4,0
+CGACT: 5,0

OK

AT+CGPADDR=1
+CGPADDR: 1,“38.7.251.144.147.137.13.18.10.211.202.87.127.208.11.104”

OK

pi@raspberrypi:~ $ speedtest
Retrieving speedtest .net configuration…
Testing from T-Mobile USA (172.59.209.197)…
Retrieving speedtest .net server list…
Selecting best server based on ping…
Hosted by Optimum Online (Parsippany, NJ) [2036.90 km]: 41.097 ms
Testing download speed…
Download: 80.95 Mbit/s
Testing upload speed…
Upload: 16.44 Mbit/s