How to set up a gateway/router using Raspberry Pi 4G/LTE Cellular Modem Kit

[ensar]

Hi,

A similar topic:

QMI How to share wwan0 with eth0

Hello every body. I just reinstall my Raspberry Pi with the 3G/4G & LTE Base HAT and it works well. I need to connect a second Raspberry to the ethernet port and both must have access to internet throught the wwan0. Specially the second Raspberry must have access to internet through the first which has the 4G HAT. Addtionnaly, on the first PI, I configured it as a hotspot following that procedure but it look not the best because it show how to share wlan0 with eth0. I also read this very use…

Hope it helps you.