Hi. New problem with power shield. I use the 12 V input (J4).
Power source Voltaic V88.
Shield battery is charged to 100% when i turn on my external power source the shield goes to charge mode.
Firmware and software 0.3.0 and 0.2.1.
Also the battery is broken of from the shield and connected with two cables.
I found that in power.sixfab.com, under configuration SET BATTERY PERCENTAGE, values were set to 0%Safe Shutdown Level and 0% Battery Max Charge Level.
I have never changed these values so its strange how these were changed.
Did reset to 20% 80% saved and forever charge was stoped.
Under dashboard status is Adapter Powered.