When communicating with the modem via minicom, I’ve noticed AT commands getting sent to the modem automatically on a regular basis. The commands I’m seeing are: ATE0, AT+CGACT?, AT+COPS?, AT+CGDCONT?, AT+QCFG, AT+CPIN, and occasionally AT+CFUN=1,1.
Is this normal behavior? It’s a bit difficult to manually issue AT commands when I’m constantly interrupted by the automatic commands.
Also there are many times when I write commands and there is nothing shown on the minicom.
In the following picture there are the responses from the commands sent automatically and there is no command shown.
