# \#eg25-g **URL:** https://community.sixfab.com/tag/eg25-g/117.md [Latest](https://community.sixfab.com/latest.md) · [Categories](https://community.sixfab.com/categories.md) · [Tags](https://community.sixfab.com/tags.md) --- ## [EG25-G modem not getting an IPv4 address after connecting to APN=vzwinternet](https://community.sixfab.com/t/eg25-g-modem-not-getting-an-ipv4-address-after-connecting-to-apn-vzwinternet/3380)
**Author:** [@vp1](https://community.sixfab.com/u/vp1)\ **Replies:** 2\ **Last updated:** [March 4, 2025, 10:15pm UTC](https://community.sixfab.com/t/eg25-g-modem-not-getting-an-ipv4-address-after-connecting-to-apn-vzwinternet/3380 "2025-03-04T22:15:08Z")
I’m using a Quectel EG25-G modem card purchased through SixFab. ‘mmcli -L’ in a CentOS 8 platform shows the card, and it also connects and registers with the Verizon Network. However, I’m only getting an IPv6 address for… --- ## [Modem Disappears a few seconds after boot](https://community.sixfab.com/t/modem-disappears-a-few-seconds-after-boot/2794)
**Author:** [@Salient](https://community.sixfab.com/u/Salient)\ **Replies:** 0\ **Last updated:** [October 27, 2023, 2:10am UTC](https://community.sixfab.com/t/modem-disappears-a-few-seconds-after-boot/2794 "2023-10-27T02:10:43Z")
Environment: Raspberry Pi 4b, Debian 12 lite, Sixfab LTE Hat, Quectel EG25G, Sixfab UPS v2, Sixfab 4g antennas, T-mobile data sim This pi is going to be an off grid server for a cabin. Plex, multiple web apps running i… --- ## [How do I find the "serial speed" to send AT commands for the EG25-G?](https://community.sixfab.com/t/how-do-i-find-the-serial-speed-to-send-at-commands-for-the-eg25-g/2531)
**Author:** [@zonker1](https://community.sixfab.com/u/zonker1)\ **Replies:** 1\ **Last updated:** [May 9, 2023, 9:58am UTC](https://community.sixfab.com/t/how-do-i-find-the-serial-speed-to-send-at-commands-for-the-eg25-g/2531 "2023-05-09T09:58:33Z")
I’m using the EG25-G in an Italian-made FoxBox LX800 SMS-Email gateway (Uses Voyage Linux on a PC Engines ALIC 6 motherboard.) I’ve found the “console” for the SMS side, but there is no response. The old module was H… --- ## [NOOB: Can the EG25-G module be used in the US?](https://community.sixfab.com/t/noob-can-the-eg25-g-module-be-used-in-the-us/2518)
**Author:** [@zonker](https://community.sixfab.com/u/zonker)\ **Replies:** 1\ **Last updated:** [April 29, 2023, 6:54am UTC](https://community.sixfab.com/t/noob-can-the-eg25-g-module-be-used-in-the-us/2518 "2023-04-29T06:54:46Z")
I’ve got deep experience in modem-type dialup, which is why I got pulled into a puzzle. Trying to upgrade a FoxBox LX800 from 3G to 4G LTE for SMS and data. Hardware is a PC Engines ALIX 6 with a Huawei MU709S-2. My digg… --- ## [For the Quectel EG25-G module, can I plug that directly into a computer mini-pci slot?](https://community.sixfab.com/t/for-the-quectel-eg25-g-module-can-i-plug-that-directly-into-a-computer-mini-pci-slot/2455)
**Author:** [@jlau](https://community.sixfab.com/u/jlau)\ **Replies:** 0\ **Last updated:** [March 9, 2023, 3:00am UTC](https://community.sixfab.com/t/for-the-quectel-eg25-g-module-can-i-plug-that-directly-into-a-computer-mini-pci-slot/2455 "2023-03-09T03:00:56Z")
I have an extra EG25-G module I purchased from sixfab which I am no longer using for raspberry pi. I would like to plug the module itself (without sixfab rpi hat) directly into a computers mini-pcie slot. The small board… --- ## [Get more satillite info GNSS & firmware update](https://community.sixfab.com/t/get-more-satillite-info-gnss-firmware-update/2357)
**Author:** [@ywpf55](https://community.sixfab.com/u/ywpf55)\ **Replies:** 1\ **Last updated:** [January 19, 2023, 4:28am UTC](https://community.sixfab.com/t/get-more-satillite-info-gnss-firmware-update/2357 "2023-01-19T04:28:19Z")
Hi everyone, I am using the Quectel eg25-g module (together with Raspi 4) for a GNSS application. But I can only get 7 satellites’ info max. (I have tested it in an open space). Is it possible to get more satellite info… --- ## [Connecting an EG25](https://community.sixfab.com/t/connecting-an-eg25/2276)
**Author:** [@tony](https://community.sixfab.com/u/tony)\ **Replies:** 13\ **Last updated:** [November 4, 2022, 11:41am UTC](https://community.sixfab.com/t/connecting-an-eg25/2276 "2022-11-04T11:41:55Z")
I am trying to get the EG25 up and working. I tried following the direction at Setting up a data connection over QMI interface using libqmi and was not successful. When I try to run any qmi commands, the interface just… --- ## [Call forwarding feature](https://community.sixfab.com/t/call-forwarding-feature/804)
**Author:** [@sairamaaaa](https://community.sixfab.com/u/sairamaaaa)\ **Replies:** 1\ **Last updated:** [October 14, 2020, 7:34pm UTC](https://community.sixfab.com/t/call-forwarding-feature/804 "2020-10-14T19:34:48Z")
Hi, We want to develop an call forwarding system using Raspberry pi 4 B, and your “Raspberry Pi 4G/LTE Cellular Modem Kit , Quectel EG25-G Mini PCIe” Can you provide me with details on hardware regarding these features…