# WAN Failover for Unifi with Jumpstart 5g **URL:** \ **Category:** Sixfab Jumpstart 5G\ **Created:** [May 24, 2024, 11:05pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040 "2024-05-24T23:05:42Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 24, 2024, 11:05pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/1 "2024-05-24T23:05:42Z")
I am able to ping the internet from Jumpstart 5g modem. When I connect the unit to my UDM pro it will not provide internet or assign an IP address. Anyone help? ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 24, 2024, 11:07pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/2 "2024-05-24T23:07:01Z")
More over, if I connect the ethernet to my laptop it wont connect to the internet which is odd right? ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 26, 2024, 8:27pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/3 "2024-05-26T20:27:03Z")
I spent $520 on this in order to have a backup wan connection if primary isp fails. I can ping internet from usb0 but I need to have the lan port provide internet to wan2 of router. I am getting annoyed in the lack of support. I only have 2 week return window. Can someone help or even let me know if my scenario is even doable? ---
**Author:** ![saeed](https://community.sixfab.com/user_avatar/community.sixfab.com/saeed/32/694_2.png) [@saeed](https://community.sixfab.com/u/saeed)\ **Post date:** [May 27, 2024, 7:44am UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/4 "2024-05-27T07:44:25Z")
Hello @swvalenti , Apologies for the delay. Did you share the internet of the cellular connection over the ethernet using the Network Manager? Do you have an active internet connection on the cellular interface? (did you check it with ping 8.8.8.8 only? could you kindly check it with [www.google.com](http://www.google.com) or any other website.) Please feel free to share any logs or screenshots that you believe might help us better understand the issue. ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 27, 2024, 11:05am UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/5 "2024-05-27T11:05:05Z")
No I did not. Can you tell me how to do that please. Yes I can ping Google on usb0 interface. ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 27, 2024, 12:26pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/6 "2024-05-27T12:26:50Z")
I figured it out in NM had to bridge both usb0 and eth0, it now works. Odd thing is i am only getting 20/4 when my phone on same cell network gets 110/40. Anything i need to change? ---
**Author:** ![saeed](https://community.sixfab.com/user_avatar/community.sixfab.com/saeed/32/694_2.png) [@saeed](https://community.sixfab.com/u/saeed)\ **Post date:** [May 28, 2024, 8:31am UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/7 "2024-05-28T08:31:24Z")
Hello, I assume it is due to the difference in the band and you may check if your carrier offers such difference on the band in use. Could you please compare the bands the device and phone are using? For Jumpstart you can use **AT+QENG=“servingcell”** AT command to check it. ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 28, 2024, 11:20am UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/8 "2024-05-28T11:20:26Z")
it returns with “error” ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 29, 2024, 6:58pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/9 "2024-05-29T18:58:13Z")
@saeed Anything you can offer on this? ---
**Author:** ![saeed](https://community.sixfab.com/user_avatar/community.sixfab.com/saeed/32/694_2.png) [@saeed](https://community.sixfab.com/u/saeed)\ **Post date:** [May 30, 2024, 9:34am UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/10 "2024-05-30T09:34:37Z")
What are you using to issue the AT commands to the module? Could you please try minicom? If you are copy - pasting try typing in. (In some cases of copying " " signs may return error). ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 30, 2024, 11:32am UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/11 "2024-05-30T11:32:18Z")
@saeed minicom doesnt launch. typed it in and still error. feel free to teamview ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 31, 2024, 4:52pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/12 "2024-05-31T16:52:33Z")
@saeed can we please figure this out…return window closing ---
**Author:** ![saeed](https://community.sixfab.com/user_avatar/community.sixfab.com/saeed/32/694_2.png) [@saeed](https://community.sixfab.com/u/saeed)\ **Post date:** [May 31, 2024, 5:39pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/13 "2024-05-31T17:39:10Z")
> [@swvalenti](#): > > minicom doesnt launch. typed it in and still error. feel free to teamview Could you kindly share your schedule for teamviewer? > [@swvalenti](#): > > can we please figure this out…return window closing Don’t worry about it. ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [May 31, 2024, 6:04pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/14 "2024-05-31T18:04:21Z")
@saeed I am available anytime. Name it. ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [June 4, 2024, 10:48am UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/15 "2024-06-04T10:48:10Z")
@saeed Hello??? ---
**Author:** ![swvalenti](https://community.sixfab.com/user_avatar/community.sixfab.com/swvalenti/32/1722_2.png) [@swvalenti](https://community.sixfab.com/u/swvalenti)\ **Post date:** [June 4, 2024, 12:06pm UTC](https://community.sixfab.com/t/wan-failover-for-unifi-with-jumpstart-5g/3040/16 "2024-06-04T12:06:01Z")
pm sent to you via message