# Using new sim and setting APN using AT commands only

**URL:** <https://community.sixfab.com/t/using-new-sim-and-setting-apn-using-at-commands-only/1896>\
**Category:** 3G/4G&LTE Base HAT\
**Tags:** apn, ec25\
**Created:** [February 15, 2022, 10:29pm UTC](https://community.sixfab.com/t/using-new-sim-and-setting-apn-using-at-commands-only/1896 "2022-02-15T22:29:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![spandan](https://community.sixfab.com/user_avatar/community.sixfab.com/spandan/32/1043_2.png) [@spandan](https://community.sixfab.com/u/spandan)\
**Post date:** [February 15, 2022, 10:29pm UTC](https://community.sixfab.com/t/using-new-sim-and-setting-apn-using-at-commands-only/1896/1 "2022-02-15T22:29:53Z")

</div>

Hello Everyone,

I have a Quectel EG25 interfaced with an SBC other than a pi and have to interface with the modem only via the Main UART. However, I do not find any FAQs or threads on the forum to help me in setting up a new SIM only using AT interface via UART.  
I see that the SIM shows inactive on the dashboard and AT+CREG tells me registration denied.  
Could someone highlight the steps to setup a new sim so I can use a TCP based connection using the same? Or direct in the direction of where I can find relevant resources.

I’m in the US and would probably like to use the ATnT network.

Thanks in advance 🙂
