# Replacing SMA connector with cable gland **URL:** \ **Category:** IP65 Weatherproof IoT Project Enclosure\ **Created:** [November 9, 2020, 3:25pm UTC](https://community.sixfab.com/t/replacing-sma-connector-with-cable-gland/883 "2020-11-09T15:25:38Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![f.korpet](https://community.sixfab.com/letter_avatar_proxy/v4/letter/f/57b2e6/32.png) [@f.korpet](https://community.sixfab.com/u/f.korpet)\ **Post date:** [November 9, 2020, 3:25pm UTC](https://community.sixfab.com/t/replacing-sma-connector-with-cable-gland/883/1 "2020-11-09T15:25:38Z")
Hi guys, I really appreciate your enclosure, but I need to connect to my Pi some devices which require normal cables, not antennas with SMA connector. So my question is, is it possible to replace SMA connectors you fitted with some cable glands with same diameter? Of course, I can do it by myself, just wondering if it’s possible without tearing apart all those drilled holes? Also, if it’s indeed possible, could you tell me what is the diameter of the holes drilled in the case for those connectors? Because there is no info about this dimension in the spec sheet. Greetings Filip ---
**Author:** ![ensar](https://community.sixfab.com/user_avatar/community.sixfab.com/ensar/32/8_2.png) [@ensar](https://community.sixfab.com/u/ensar)\ **Post date:** [November 16, 2020, 5:18pm UTC](https://community.sixfab.com/t/replacing-sma-connector-with-cable-gland/883/2 "2020-11-16T17:18:10Z")
Hi Filip, Our new product IP54 enclosure will be available on our website very soon. It was developed as a solution for connecting different cables. I hope this will please you. ![2](https://community.sixfab.com/uploads/default/original/1X/28314ecbff969ae83ac5c35b773cc8120c61301e.jpeg) ![4](https://community.sixfab.com/uploads/default/original/1X/c394d45d9638c8a9bafc06b31753cd39cc34ffff.jpeg) Thank you.