# How to handle 2 LTE Base Hat?

**URL:** <https://community.sixfab.com/t/how-to-handle-2-lte-base-hat/825>\
**Category:** 3G/4G&LTE Base HAT\
**Created:** [October 19, 2020, 9:39am UTC](https://community.sixfab.com/t/how-to-handle-2-lte-base-hat/825 "2020-10-19T09:39:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nfernandez](https://community.sixfab.com/user_avatar/community.sixfab.com/nfernandez/32/706_2.png) [@nfernandez](https://community.sixfab.com/u/nfernandez)\
**Post date:** [October 19, 2020, 9:39am UTC](https://community.sixfab.com/t/how-to-handle-2-lte-base-hat/825/1 "2020-10-19T09:39:11Z")

</div>

Hi,

I have 2 LTE Base Hat+2 Quectel modules. I reached to configured one Hat with an IP and interface. When I plug the 2 hats I can see that the raspberry pi detects both of them (in the dmesg messages) and generate 2 interfaces (wwan0 and wwan1) but, how and where should I configure the second hat (interface)? For the first hat, I configured it by: sudo ./quectel-CM -s apn.

Thank you

---

<div class="post-metadata">

**Author:** ![nfernandez](https://community.sixfab.com/user_avatar/community.sixfab.com/nfernandez/32/706_2.png) [@nfernandez](https://community.sixfab.com/u/nfernandez)\
**Post date:** [October 20, 2020, 1:40pm UTC](https://community.sixfab.com/t/how-to-handle-2-lte-base-hat/825/2 "2020-10-20T13:40:25Z")

</div>

Solved: quectel-CM has an option for indicating the interface that you want to assign the apn with the “-i” option
