# How to fix/replace missing S2 and L2 parts from UPSHat v1

**URL:** <https://community.sixfab.com/t/how-to-fix-replace-missing-s2-and-l2-parts-from-upshat-v1/2095>\
**Category:** Power Management & UPS HAT\
**Created:** [July 4, 2022, 9:40pm UTC](https://community.sixfab.com/t/how-to-fix-replace-missing-s2-and-l2-parts-from-upshat-v1/2095 "2022-07-04T21:40:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mdella](https://community.sixfab.com/user_avatar/community.sixfab.com/mdella/32/1160_2.png) [@mdella](https://community.sixfab.com/u/mdella)\
**Post date:** [July 4, 2022, 9:40pm UTC](https://community.sixfab.com/t/how-to-fix-replace-missing-s2-and-l2-parts-from-upshat-v1/2095/1 "2022-07-04T21:40:40Z")

</div>

So I’ve been playing with the UPS Hat on and off for some time and after looking at several diagrams and reading the forum, I’m realizing that I have a missing LED (L2) and switch (S2) on my Hat. No idea how they went missing wether it was in shipping or something happened on my end on the bench. I don’t remember seeing them before which might be why my experience hasn’t been the best (now that I recognize the missing parts, its easier to work around them).

Anyone have pointers where I can source the S2 and L2 parts so that I can either repair my unit or figure out some method of duplicating the missing components? I figure I’ve been sitting on this thing on my bench for way too long to get it supported or replaced so looking for option three 🙂

Marcos