# Can I use USB-C to power the board instead of the HAT

**URL:** <https://community.sixfab.com/t/can-i-use-usb-c-to-power-the-board-instead-of-the-hat/2388>\
**Category:** NVIDIA Jetson Nano Dev Kit\
**Created:** [January 29, 2023, 3:12am UTC](https://community.sixfab.com/t/can-i-use-usb-c-to-power-the-board-instead-of-the-hat/2388 "2023-01-29T03:12:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![theguybieber](https://community.sixfab.com/user_avatar/community.sixfab.com/theguybieber/32/1348_2.png) [@theguybieber](https://community.sixfab.com/u/theguybieber)\
**Post date:** [January 29, 2023, 3:12am UTC](https://community.sixfab.com/t/can-i-use-usb-c-to-power-the-board-instead-of-the-hat/2388/1 "2023-01-29T03:12:51Z")

</div>

I am adapting the board for quadcopter usage. Actually really didn’t need the Nano version but it seemed the lightest. I have 5v and ground coming off a USB-C port from my application computer (NXP NavQ+). Can I use the USB power and ground to supply the modem. The board is driven off battery and can pull plenty of current from there. Really the only things I need of the hat connector are the airplane mode and power disable pins.

---

<div class="post-metadata">

**Author:** ![ensar](https://community.sixfab.com/user_avatar/community.sixfab.com/ensar/32/8_2.png) [@ensar](https://community.sixfab.com/u/ensar)\
**Post date:** [January 31, 2023, 4:13pm UTC](https://community.sixfab.com/t/can-i-use-usb-c-to-power-the-board-instead-of-the-hat/2388/2 "2023-01-31T16:13:30Z")

</div>

Hi,

You can use the USB-C cable by soldering the PIN header to the other end and connecting the 5V and GND pins of the 40-pin SMD header on the HAT.

For further details on the pin outputs:

> **[Technical Details](https://docs.sixfab.com/docs/nvidia-jetson-nano-4g-lte-cellular-modem-kit-technical-details)**
>
> This section introduces the concepts and terms that are crucial for the understanding, implementation and use of NVIDIA Jetson Nano 4G/LTE Cellular Modem Kit
