{"users":[{"id":262,"username":"Diy","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/d/dfb087/{size}.png","trust_level":1},{"id":7,"username":"ensar","name":"ensar","avatar_template":"/user_avatar/community.sixfab.com/ensar/{size}/8_2.png","admin":true,"moderator":true,"trust_level":2},{"id":1272,"username":"nail.lazrak","name":"NL","avatar_template":"/letter_avatar_proxy/v4/letter/n/6a8cbe/{size}.png","trust_level":0},{"id":1330,"username":"bkonick","name":"","avatar_template":"/user_avatar/community.sixfab.com/bkonick/{size}/1749_2.png","trust_level":0},{"id":1315,"username":"Denny","name":"Dennis Kornbluh","avatar_template":"/user_avatar/community.sixfab.com/denny/{size}/1725_2.png","trust_level":0},{"id":341,"username":"cecil","name":"cecil","avatar_template":"/letter_avatar_proxy/v4/letter/c/eb8c5e/{size}.png","trust_level":2},{"id":907,"username":"drowshan","name":"Rowshan Dowlatabadi","avatar_template":"/user_avatar/community.sixfab.com/drowshan/{size}/1215_2.png","trust_level":1},{"id":892,"username":"pedrosk","name":"pedrosk","avatar_template":"/user_avatar/community.sixfab.com/pedrosk/{size}/1443_2.png","trust_level":0},{"id":1008,"username":"atkihatakimi","name":"ATK İHA Takımı","avatar_template":"/user_avatar/community.sixfab.com/atkihatakimi/{size}/1350_2.png","trust_level":1},{"id":995,"username":"sc1","name":"Stephen Copeland","avatar_template":"/user_avatar/community.sixfab.com/sc1/{size}/1333_2.png","trust_level":1},{"id":1016,"username":"twist27896","name":"","avatar_template":"/letter_avatar_proxy/v4/letter/t/22d042/{size}.png","trust_level":1},{"id":472,"username":"kev.oue","name":"kev.oue","avatar_template":"/user_avatar/community.sixfab.com/kev.oue/{size}/1113_2.png","trust_level":1},{"id":6,"username":"saeed","name":"Saeed","avatar_template":"/user_avatar/community.sixfab.com/saeed/{size}/694_2.png","moderator":true,"trust_level":2},{"id":588,"username":"marxter","name":"Marxter Go.","avatar_template":"/user_avatar/community.sixfab.com/marxter/{size}/729_2.png","trust_level":1},{"id":236,"username":"shawnj007","name":"shawnj007","avatar_template":"/user_avatar/community.sixfab.com/shawnj007/{size}/982_2.png","trust_level":2},{"id":719,"username":"howardlf","name":"howardlf","avatar_template":"/user_avatar/community.sixfab.com/howardlf/{size}/938_2.png","trust_level":1},{"id":762,"username":"falconeee","name":"Gabriel Falcone ","avatar_template":"/letter_avatar_proxy/v4/letter/f/90db22/{size}.png","trust_level":1},{"id":834,"username":"pisurfr","name":"TvE","avatar_template":"/user_avatar/community.sixfab.com/pisurfr/{size}/1117_2.png","trust_level":1},{"id":733,"username":"alhamdliyesua","name":"Wjlongnecker","avatar_template":"/letter_avatar_proxy/v4/letter/a/278dde/{size}.png","trust_level":2},{"id":599,"username":"davidbonn","name":"David Bonn","avatar_template":"/user_avatar/community.sixfab.com/davidbonn/{size}/753_2.png","trust_level":2},{"id":786,"username":"GraceBT","name":"Grace Thomson","avatar_template":"/user_avatar/community.sixfab.com/gracebt/{size}/1056_2.png","trust_level":0},{"id":606,"username":"richard","name":"Richard","avatar_template":"/user_avatar/community.sixfab.com/richard/{size}/764_2.png","trust_level":0},{"id":491,"username":"barryjump","name":"mrpher","avatar_template":"/user_avatar/community.sixfab.com/barryjump/{size}/1127_2.png","trust_level":2},{"id":119,"username":"jacob.h.christensen","name":"Jacob","avatar_template":"/letter_avatar_proxy/v4/letter/j/87869e/{size}.png","trust_level":0},{"id":268,"username":"paul.milesi","name":"paul.milesi","avatar_template":"/letter_avatar_proxy/v4/letter/p/7ea924/{size}.png","trust_level":1},{"id":749,"username":"danielrubinov97","name":"Daniel Rubinov","avatar_template":"/user_avatar/community.sixfab.com/danielrubinov97/{size}/1001_2.png","trust_level":1},{"id":656,"username":"icanhazpython","name":"Icanhazpython","avatar_template":"/user_avatar/community.sixfab.com/icanhazpython/{size}/847_2.png","trust_level":0},{"id":655,"username":"kashiozel","name":"Kashiozel","avatar_template":"/user_avatar/community.sixfab.com/kashiozel/{size}/846_2.png","trust_level":0},{"id":218,"username":"pfemiani","name":"Peter Femiani","avatar_template":"/user_avatar/community.sixfab.com/pfemiani/{size}/331_2.png","trust_level":1},{"id":456,"username":"jamos","name":"jamos","avatar_template":"/letter_avatar_proxy/v4/letter/j/a5b964/{size}.png","trust_level":0},{"id":471,"username":"Danny_Q","name":"d.cox","avatar_template":"/user_avatar/community.sixfab.com/danny_q/{size}/587_2.png","trust_level":1},{"id":585,"username":"cohendavid753","name":"David","avatar_template":"/user_avatar/community.sixfab.com/cohendavid753/{size}/725_2.png","trust_level":0},{"id":197,"username":"fred","name":"Fred","avatar_template":"/user_avatar/community.sixfab.com/fred/{size}/772_2.png","trust_level":1},{"id":477,"username":"ericwaynedavis","name":"ericwaynedavis","avatar_template":"/user_avatar/community.sixfab.com/ericwaynedavis/{size}/943_2.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/legacy-products/sixfab-power/22?page=1","per_page":30,"top_tags":[{"id":21,"name":"ups-hat","slug":"ups-hat"},{"id":29,"name":"battery","slug":"battery"},{"id":22,"name":"ups","slug":"ups"},{"id":50,"name":"firmware","slug":"firmware"},{"id":48,"name":"power","slug":"power"},{"id":1,"name":"qmi","slug":"qmi"},{"id":20,"name":"raspberry-pi-4","slug":"raspberry-pi-4"},{"id":52,"name":"timer","slug":"timer"},{"id":25,"name":"usb","slug":"usb"},{"id":51,"name":"watchdog","slug":"watchdog"}],"topics":[{"fancy_title":"Downloads Firmware for V1 and V2 of the ups?","id":2956,"title":"Downloads Firmware for V1 and V2 of the ups?","slug":"downloads-firmware-for-v1-and-v2-of-the-ups","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2024-03-07T03:58:51.267Z","last_posted_at":"2024-06-21T05:46:19.868Z","bumped":true,"bumped_at":"2024-06-21T05:46:19.868Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, is there any way I could download the latest firmware for both versions of the ups? \nI have been out of the loop for some time now, and have only just found out that the ups has been discontinued.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":50,"name":"firmware","slug":"firmware"}],"tags_descriptions":{},"views":560,"like_count":1,"has_summary":false,"last_poster_username":"ensar","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"posters":[{"extras":null,"description":"Original Poster","user_id":262,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":7,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1272,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1330,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Please recommend a product","id":3046,"title":"Please recommend a product","slug":"please-recommend-a-product","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2024-05-28T21:07:36.904Z","last_posted_at":"2024-05-28T21:07:37.068Z","bumped":true,"bumped_at":"2024-05-28T21:07:37.068Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, \nI have a customer in Saudi Arabia who wants to do IoT communication via GSM. Based on a cursory search, it looks like there are 3 mobile providers there. \nFor someone who has no experience with cellular communica…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":347,"like_count":0,"has_summary":false,"last_poster_username":"Denny","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1315,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Power Hat changelog?","id":842,"title":"Power Hat changelog?","slug":"power-hat-changelog","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2020-10-27T13:55:24.303Z","last_posted_at":"2020-10-28T16:22:08.249Z","bumped":true,"bumped_at":"2024-01-15T20:13:24.418Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi all, \nIs there a changelog for power hat versions? I have version 0.2.7 and have been bitten many times by upgrading firmware. I want to make sure it is something that will help resolve my issue before doing it. \nThan…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1108,"like_count":0,"has_summary":false,"last_poster_username":"cecil","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":341,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Being charged for data even when not using the device","id":2681,"title":"Being charged for data even when not using the device","slug":"being-charged-for-data-even-when-not-using-the-device","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2023-08-19T03:38:40.226Z","last_posted_at":"2023-08-19T03:38:40.308Z","bumped":true,"bumped_at":"2023-08-19T03:38:40.308Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I noticed charges on my CC for the duration of the time I had actually disconnected the device from Raspberry (to download some apps and upgrades) and was using my home wifi. \nSteps to reproduce: \n1- Disconnected the dev…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":25,"name":"usb","slug":"usb"}],"tags_descriptions":{},"views":635,"like_count":0,"has_summary":false,"last_poster_username":"drowshan","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":907,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"PowerHAT compatibility options with other SoC board","id":2592,"title":"PowerHAT compatibility options with other SoC board","slug":"powerhat-compatibility-options-with-other-soc-board","posts_count":4,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2023-06-08T19:12:17.426Z","last_posted_at":"2023-06-10T22:32:02.791Z","bumped":true,"bumped_at":"2023-06-10T22:32:02.791Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Since the Raspberry PI is out of stock for the past very long time I am looking on building my systems on other SoC boards. What else is Power HAT compatible with besides Raspberry PI?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":732,"like_count":0,"has_summary":false,"last_poster_username":"ensar","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":892,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Can’t connect to Mission Planner","id":2390,"title":"Can't connect to Mission Planner","slug":"cant-connect-to-mission-planner","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":"https://community.sixfab.com/uploads/default/optimized/2X/2/239f47c62a56eb41cd9c6f34c2146f07189a2db5_2_1024x500.jpeg","created_at":"2023-01-29T19:28:11.475Z","last_posted_at":"2023-02-08T17:06:34.339Z","bumped":true,"bumped_at":"2023-02-08T17:06:34.339Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m trying to connect my sixfab to mission planner using port forwarding. In Ssh terminal it can connect but in Mission Planner it says “connect failed” giving this error. Please someone can help me?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":848,"like_count":0,"has_summary":false,"last_poster_username":"atkihatakimi","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1008,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":995,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1016,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"UPS Hat - Discontinued","id":2281,"title":"UPS Hat - Discontinued","slug":"ups-hat-discontinued","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2022-11-09T12:07:14.972Z","last_posted_at":"2022-11-14T12:31:04.556Z","bumped":true,"bumped_at":"2022-11-14T12:31:04.556Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have been working on a project that uses the UPS Hat, just getting into the final stages of design. However I just noticed that they are out of stock, on the web page it says that there is a problem with the power comp…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1079,"like_count":0,"has_summary":false,"last_poster_username":"saeed","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":472,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":6,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Where is this board?","id":1482,"title":"Where is this board?","slug":"where-is-this-board","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2021-07-21T04:46:41.163Z","last_posted_at":"2022-11-09T23:40:19.504Z","bumped":true,"bumped_at":"2022-11-09T23:40:19.504Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, guys, I hope you can help me?! I’m looking for this power hat board because it would be perfect for a project, but you can’t buy it anywhere, will it be available again someday, does anyone know more??","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1254,"like_count":0,"has_summary":false,"last_poster_username":"kev.oue","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":588,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":236,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":472,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Power hat on RPi running Victron Venus Gx?","id":2261,"title":"Power hat on RPi running Victron Venus Gx?","slug":"power-hat-on-rpi-running-victron-venus-gx","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2022-10-23T05:13:24.611Z","last_posted_at":"2022-10-24T13:22:48.760Z","bumped":true,"bumped_at":"2022-10-24T13:22:48.760Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, \nI have a Raspberry Pi 3b+ running the latest Venus OS from Victron (2.92 as of this writing). This OS supports Python 3. The Venus RPi sends monitoring data from my solar/battery components through wifi to a seco…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1611,"like_count":1,"has_summary":false,"last_poster_username":"howardlf","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":719,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":6,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Set safe shutdown battery level UPS HAT v2","id":1863,"title":"Set safe shutdown battery level UPS HAT v2","slug":"set-safe-shutdown-battery-level-ups-hat-v2","posts_count":9,"reply_count":5,"highest_post_number":9,"image_url":null,"created_at":"2022-01-25T21:06:29.698Z","last_posted_at":"2022-10-03T20:59:58.849Z","bumped":true,"bumped_at":"2022-10-03T20:59:58.849Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \ni working with a UPS HAT v2 and i wanna know if when the DC power input is disconneted and the the power is just of the battery i can keep the system running and when the battery is low he just turn off safely. \nI s…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1546,"like_count":3,"has_summary":false,"last_poster_username":"pisurfr","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"posters":[{"extras":null,"description":"Original Poster","user_id":762,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":7,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":834,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"UPS HAT is unusable, any chance to get it fixed?","id":2207,"title":"UPS HAT is unusable, any chance to get it fixed?","slug":"ups-hat-is-unusable-any-chance-to-get-it-fixed","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2022-09-19T01:40:58.702Z","last_posted_at":"2022-10-03T16:16:42.259Z","bumped":true,"bumped_at":"2022-10-03T16:16:42.259Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The UPS HAT power API just doesn’t work and reports bogus values. As far as I can tell, it also doesn’t charge the battery properly due to those bogus values. This has been flagged in a ticket bogus battery voltage? · Is…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":863,"like_count":1,"has_summary":false,"last_poster_username":"pisurfr","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":834,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Is SixFab still alive? Any engineers left?","id":2219,"title":"Is SixFab still alive? Any engineers left?","slug":"is-sixfab-still-alive-any-engineers-left","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2022-09-27T18:22:59.202Z","last_posted_at":"2022-09-27T18:42:15.935Z","bumped":true,"bumped_at":"2022-09-27T18:42:15.935Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is SixFab still in business? Are there any engineers left at the company? \nThe UPS HAT doesn’t work. Issues go completely unanswered. The github repo has not been updated in over 9 months. Threads here don’t get a respon…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":919,"like_count":1,"has_summary":false,"last_poster_username":"ensar","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":834,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How I made the UPS v2 work for me","id":1848,"title":"How I made the UPS v2 work for me","slug":"how-i-made-the-ups-v2-work-for-me","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":"https://community.sixfab.com/uploads/default/original/2X/c/c437f202b878fcafa090ba422838b75f010c1070.png","created_at":"2022-01-17T17:55:37.718Z","last_posted_at":"2022-08-27T19:13:18.782Z","bumped":true,"bumped_at":"2022-08-27T19:13:18.782Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Well friends, perhaps I’m just dumb, but it took me a good long time to get the UPS to work for me. I’ll give you the short version and the long version\nAcknowledgement: A big thanks to @shawnj007 for helping me get an u…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1692,"like_count":1,"has_summary":false,"last_poster_username":"pedrosk","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":733,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":599,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":892,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Who to properly stack hats with UPS hat / where do you place it?","id":2134,"title":"Who to properly stack hats with UPS hat / where do you place it?","slug":"who-to-properly-stack-hats-with-ups-hat-where-do-you-place-it","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2022-08-01T15:10:36.483Z","last_posted_at":"2022-08-27T19:08:07.868Z","bumped":true,"bumped_at":"2022-08-27T19:08:07.868Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I tried to search for this but did not get much. \nI think the primary question is where should the power UPS HAT go? Directly on top of Raspberry pi, or on top of other HATs? \nI am hopeing to use it with PI Plates Thermo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1067,"like_count":0,"has_summary":false,"last_poster_username":"pedrosk","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":892,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Will the Power hat work with a RockPI?","id":1918,"title":"Will the Power hat work with a RockPI?","slug":"will-the-power-hat-work-with-a-rockpi","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2022-02-23T00:45:45.319Z","last_posted_at":"2022-08-02T12:16:55.786Z","bumped":true,"bumped_at":"2022-08-02T12:16:55.786Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am thinking about using a RockPI to operate an amateur radio station using WSJTX and digital modes. It would be great if I could use the SIXFAB power hat for field operations. I would like to use the RTC and the UPS to…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1065,"like_count":0,"has_summary":false,"last_poster_username":"pedrosk","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":786,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":892,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Confused SIM Data Reporting","id":2132,"title":"Confused SIM Data Reporting","slug":"confused-sim-data-reporting","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2022-08-01T10:05:56.448Z","last_posted_at":"2022-08-02T09:25:59.200Z","bumped":true,"bumped_at":"2022-08-02T09:25:59.200Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have two SIMs - one used to connect to a remote Pi and the second locally.  I’ve lost connection to the remote device but data is still reported going to/from the second device.  Somewhat strange as this has been on my…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":735,"like_count":0,"has_summary":false,"last_poster_username":"ensar","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":606,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"PowerHat Python API debugging","id":2035,"title":"PowerHat Python API debugging","slug":"powerhat-python-api-debugging","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2022-05-22T13:08:20.215Z","last_posted_at":"2022-05-22T20:11:27.061Z","bumped":true,"bumped_at":"2022-05-22T20:11:27.061Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Looking for any pointers on this. \nI’m running a Powerhat (v1) on a Oratek Tofu (same 40 pin as the pi4) and experiencing some issues with the sixfab-power-python-api in my own python script. \nDuring testing this is the …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1003,"like_count":0,"has_summary":false,"last_poster_username":"barryjump","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":491,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Posting Schematics","id":312,"title":"Posting Schematics","slug":"posting-schematics","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2020-05-20T22:09:06.191Z","last_posted_at":"2022-05-13T21:00:54.399Z","bumped":true,"bumped_at":"2022-05-13T21:46:08.905Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Many of your other boards have schematics posted in github. Will you be posting schematics for the power hat as well?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1107,"like_count":2,"has_summary":false,"last_poster_username":"ensar","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":119,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":834,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Accuracy of measurements","id":2017,"title":"Accuracy of measurements","slug":"accuracy-of-measurements","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2022-05-09T14:59:29.877Z","last_posted_at":"2022-05-09T14:59:29.937Z","bumped":true,"bumped_at":"2022-05-09T20:17:56.669Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Has anyone done an assessment of the accuracy of the measurements provided by the UPS HAT v2? \nI’m comparing the measurements provided by my UPS HAT with multimeter readings and the accuracy leaves a lot to be desired: \n\n…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":899,"like_count":0,"has_summary":false,"last_poster_username":"pisurfr","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":834,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Battery with bigger capacity","id":1101,"title":"Battery with bigger capacity","slug":"battery-with-bigger-capacity","posts_count":6,"reply_count":4,"highest_post_number":7,"image_url":null,"created_at":"2021-01-14T21:38:13.293Z","last_posted_at":"2022-01-12T10:24:13.175Z","bumped":true,"bumped_at":"2022-01-12T10:24:13.175Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, \nI need to extend the operation of the Pi on battery for a long period of time, so I need to use another battery than the flat top unprotected 18650 battery. \nWhat are the characteristics my battery should meet ? \n\nL…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":29,"name":"battery","slug":"battery"},{"id":22,"name":"ups","slug":"ups"}],"tags_descriptions":{},"views":1563,"like_count":0,"has_summary":false,"last_poster_username":"marxter","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":268,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":749,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":599,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":588,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"[SOLVED] How to make Easy Deployment Mode enable just before shutdown!","id":1477,"title":"[SOLVED] How to make Easy Deployment Mode enable just before shutdown!","slug":"solved-how-to-make-easy-deployment-mode-enable-just-before-shutdown","posts_count":6,"reply_count":2,"highest_post_number":7,"image_url":null,"created_at":"2021-07-19T00:16:49.918Z","last_posted_at":"2022-01-11T02:22:13.201Z","bumped":true,"bumped_at":"2022-01-11T02:22:13.201Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"In a quest not to need an external button press, have the system boot as soon as DC power is available, and allow the system to shutdown gracefully, I have developed the following method and want to share for those that …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":2213,"like_count":2,"has_summary":false,"last_poster_username":"shawnj007","category_id":22,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":236,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":599,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Open source firmware?","id":1643,"title":"Open source firmware?","slug":"open-source-firmware","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2021-10-12T23:50:23.955Z","last_posted_at":"2021-12-23T23:26:49.655Z","bumped":true,"bumped_at":"2021-12-23T23:26:49.655Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Shouldn’t the firmware be open source? That would at least allow people to improve upon it and add features like booting the pi when power is re-supplied to the hat.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1701,"like_count":0,"has_summary":false,"last_poster_username":"shawnj007","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":656,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":236,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"PowerHat API exapmles","id":1641,"title":"PowerHat API exapmles","slug":"powerhat-api-exapmles","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2021-10-12T10:29:31.414Z","last_posted_at":"2021-10-13T14:15:16.307Z","bumped":true,"bumped_at":"2021-10-13T14:15:16.307Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, iv’e bought the new power hat (v2). \nI’d like to see and customize an example of scheduled poweroff via hardware and power on with an hour later. \nI tried to use the api docs but couldn’t get it to work. \nThank…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":946,"like_count":0,"has_summary":false,"last_poster_username":"ensar","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":655,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sixfab Power Dashboard","id":1613,"title":"Sixfab Power Dashboard","slug":"sixfab-power-dashboard","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2021-09-21T17:44:52.563Z","last_posted_at":"2021-09-25T12:11:54.676Z","bumped":true,"bumped_at":"2021-09-25T12:11:54.676Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hello, does this power.sixfab dashboard exist? at least there is a login and you can register but I can’t get any further after logging in! or do I do something wrong ?! and one more question, why is the battery capacity…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1079,"like_count":0,"has_summary":false,"last_poster_username":"marxter","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":588,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Auto Shutdown on External Power Loss","id":555,"title":"Auto Shutdown on External Power Loss","slug":"auto-shutdown-on-external-power-loss","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2020-07-21T17:38:24.951Z","last_posted_at":"2020-11-15T18:33:07.321Z","bumped":true,"bumped_at":"2021-07-19T00:40:06.233Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m looking to simply initiate a “safe” shutdown of the rPi (3B+) on the event that external power is lost. I have been looking through docs and see ways to schedule events, but i don’t see any way to “react” to events s…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1145,"like_count":1,"has_summary":false,"last_poster_username":"shawnj007","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":218,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":236,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Main power / secondary power and safe shutdown script","id":1185,"title":"Main power / secondary power and safe shutdown script","slug":"main-power-secondary-power-and-safe-shutdown-script","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2021-02-14T10:46:23.304Z","last_posted_at":"2021-07-19T00:36:09.604Z","bumped":true,"bumped_at":"2021-07-19T00:36:09.604Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I need to know if the following is possible, I am trying to build a script but my knowledge of the API does not go far. \nThis script must include a way to configure: \n\nMain power selection: 12v, USB or 5v battery (this w…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":1311,"like_count":0,"has_summary":false,"last_poster_username":"shawnj007","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":456,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":471,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":236,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Immediate power up with external power, safe shutdown when removed","id":858,"title":"Immediate power up with external power, safe shutdown when removed","slug":"immediate-power-up-with-external-power-safe-shutdown-when-removed","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2020-11-03T15:57:55.536Z","last_posted_at":"2021-07-19T00:34:43.828Z","bumped":true,"bumped_at":"2021-07-19T00:34:43.828Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"TL;DR - How to make the unit boot immediately when external power is applied and safely shutdown when external power is removed? \nUse case: \nStationary, mounted Rpi (no direct access to circuit board and buttons), with t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[{"id":21,"name":"ups-hat","slug":"ups-hat"},{"id":20,"name":"raspberry-pi-4","slug":"raspberry-pi-4"},{"id":22,"name":"ups","slug":"ups"}],"tags_descriptions":{},"views":2181,"like_count":2,"has_summary":false,"last_poster_username":"shawnj007","category_id":22,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":236,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Add installation script debian support","id":1471,"title":"Add installation script debian support","slug":"add-installation-script-debian-support","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2021-07-14T05:56:17.943Z","last_posted_at":"2021-07-14T08:05:32.847Z","bumped":true,"bumped_at":"2021-07-14T08:05:32.847Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"hi there, \nany plans to support other os? debian 10 / ubuntu and such? \ni’m getting pygobject error during installation. \nthanks.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":789,"like_count":0,"has_summary":false,"last_poster_username":"saeed","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":null,"description":"Original Poster","user_id":585,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":6,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"AC/DC converter advice","id":1383,"title":"AC/DC converter advice","slug":"ac-dc-converter-advice","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2021-05-17T09:53:32.766Z","last_posted_at":"2021-05-21T05:40:56.692Z","bumped":true,"bumped_at":"2021-05-21T05:40:56.692Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, \nI’m looking for power supply fort sixfab power. \nMy project is outdoor system without standard wall plug, I need to connect to existing line. And Does someone have any advice about choice? \nI found this, but I’m …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":910,"like_count":0,"has_summary":false,"last_poster_username":"fred","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":197,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Change the UPS HAT cloud update interval","id":1348,"title":"Change the UPS HAT cloud update interval","slug":"change-the-ups-hat-cloud-update-interval","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2021-04-17T15:13:21.050Z","last_posted_at":"2021-04-19T20:49:44.322Z","bumped":true,"bumped_at":"2021-04-19T20:49:44.322Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, can someone point to the code responsible for the cloud update functions? I am looking for a method to reduce the update interval to save on LTE bandwidth. \nThanks, \nEric","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags":[],"tags_descriptions":{},"views":776,"like_count":1,"has_summary":false,"last_poster_username":"ericwaynedavis","category_id":22,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":477,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7,"primary_group_id":null,"flair_group_id":null}]}]}}